Forgotton Password? | Register



We are open!
Sub Categories
Barrel Racking and Handling   •    Beer Coolers   •    Beer Lines, Pumps and Line Cleaning   •    Carbonator   •    Cellar Coolers   •    Keg Chiller
Easy rack cask lift with floor clearance of 128cm
Black in working order
Approx 7years old

£250 VAT Free

Pepsi/fountain drink dispencing equipment.
Complete units just require installation gas and bag in boxes.

£500 £300 VAT Free ono each

| Quantity: 2
Stanwell STL110 complete with wall bracket. A run silent baffled unit with capacity to run up to 12 flojet pumps (Dependant on head pressure). If you are running pumps on gas this unit offers excellent savings. Operating pressure at 7 bar with a 24 litre receiver volume, weight 21kgs and oil free operation. Lightweight stainless Steel Receiver and automatic condensate removal. Output 105 L/min.

£375 £325 VAT Free

  • Beermaster BMO-150-1 condensing unit - The condensing unit was mounted outside and has been part dismantled to remove it from the wall. Everything is there.
  • Beermaster BMIE407-69 EC Fan Evaporator - The evaporator fan is still on the wall in the cellar so the buyer will need to remove it.

£850 VAT Free ono

Used Easy rack, holds 6 firkins (9Gall Barrels)

£275 VAT Free ono

2018 Gamko Keg Box/Cooler in very good condition. I purchased it new from MJS Catering Equipment.
The model is FK/8 and holds 8x 50 litre kegs or 16 x 30 litre kegs.
Can be viewed and seen working at our base.

£1300 +VAT ono

Model: FK2-25/8L
Grade B

£990 +VAT

Draught Soft Drinks Dispense With Post Mix Cooler Carbonator Iceberg SR
I have an Iceberg SR post mix cooler which can chill syrup flavours as well as still water and carbonated water. Also included is a Carbonator 2000 water Carbonator which takes standard tap water and carbonates it up before running through the cooler.

£120 VAT Free

The KONTAKT 40/ K has a high performance.
This cooler has a continuous cooling capacity of 35-40l/h., max. 50l/h.
The modern compressor cooling unit uses the power input for direct transfer to chilling, which guarantees minimum energy usage.
Excellent chilled beer will be ready in the thermo block within 5-8 minutes after the cooler has been switched on.
LINDR cooling technology is 45% more efficient than its power input.
All external construction is made from stainless steel to give a more clean and aesthetic look.

£800 £630 VAT Free ono

£20 +VAT each

| Quantity: 10
Recent unit and in A1 condition, 8 x extra long coils (10 metre) but can be provided with a mix of 10 coils if required. Complete with a full complement of 3/8" John Guest fittings along with 15mm isolators for high powered Totton pump. Integral air cooled therefore no heat dump and external piping required.

£595 £525 VAT Free ono

Load more listings