Cookie Consent by Free Privacy Policy Generator website

Login

Forgotton Password? | Register

Register

Register

Sold 8x NEW Qualitair QLC 20 Indoor Units With Qaulitair ICU80 / ICUS80 Outdoor Units - West Yorkshire

Description

For sale – New Old stock, boxed. Selling as pairs:

Qualitair QLC 20 Indoor units, coupled with Qaulitair ICU80/ICUS80 Outdoor Units

Priced to clear £500.00 per paired set. No VAT. Or best offer.

QUALITAIR QLC Low Temperature DX Cassette Indoor Unit
Model: QLC20 8nr available
QLC Indoor Unit, designed to be installed in false or suspended ceiling.
Can be mounted from a solid ceiling.
Mains Power cable.
3 phase power supply
Refrigerant type: (R407)
A range of option kits, supplied separately, are available which require fitting on site.
Fascia not included nor supplied with this unit.
Includes Danfoss Room Thermostat.
Dimensions: (without fascia)
Body Length 1165mm
Body Width 735mm
Body Height 349mm
Weight kg 75
Installation Manual included.

QUALITAIR ICU Outdoor Condensing Unit
Model: ICU80 (3phase) 1nr available (100m pipe run)
Model: ICUS80 (1phase) 8nr available (30m pipe run)
ICU Outdoor Unit, either mounted on a level surface or suspended from a vertical wall using Qualitair wall mounted Optional kit (1) (Not supplied)
The unit should always be mounted on a load bearing wall and not a partition wall.
Refrigerant type: (R410a)
Dimensions:
Width 800mm
Height 765mm
Depth 320mm
Weight kg 64
Installation Manual included.

NOTE TO BUYER:
In order to be able to use (R410a) in both units, requires the fitting of a Type: 068U1963 ‘Danfoss TUB/a Therm Expansion Valve. (Not supplied)

Installation & Safety
The units making up the system must only be installed by qualified engineers, following the mandatory codes of practice. And in strict accordance with the Manufacturers Installation Manual and guidelines.

Handling
Care must be taken when units are unpacked, lifted or moved, to ensure all operatives and everything is safe. When lifting equipment is used, it must be suitable and approved for the task.

Application
Ensure that the units are only used for the suitable purpose and application for which they were designed.
Electrical Connection
Electrical work and connections must be made only by authorised electricians in accordance with mandatory regulations and local codes of practice.

Warranty
Sold without warranties & no returns

Safety Procedures
All works must be carried out in accordance with manufacturer’s installation and operating procedures.
Good working practices must be followed at all times, so that Mechanical and Electrical hazards are kept to a minimum.
The equipment has been fitted with doors and covers to prevent access during operation. These must be kept in place and additional guards fitted if necessary.
The equipment must be connected to an external electrical isolator if is not supplied fitted to the unit.
Servicing and maintenance must only be carried out by fully qualified and competent staff. Before any work started, electrically isolate the units to make sure they cannot be switched on accidentally and allow sufficient time for isolated parts to come to rest before removing panel. Electrical isolation switches must be labelled to show that they are OFF during servicing and maintenance operations.


Please Note
Whereas every attempt has been made to describe the items for sale accurately, potential buyers should check the units are suitable for their requirements

Delivery notes

We would prefer for Buyer to collect, location West Yorkshire.
But, if delivery preferred we can quote separately.

This item is now sold


Price: Sold